ESD Mats
ESD Two layer table mats - RS-300
- Material: Synthetic rubber
- Upper layer: Dissipative (coloured, matt surface)
Lower layer: Conductive (black)
- Electrostatic decay: from 5000 V to zero < 0.05 sec
- Surface resistance RS:
conductive layer: < 105 Ω
dissipative layer 107 - 109 Ω
- Typical resistance to ground RG = 106 - 108 Ω
Order codes:
| Part number |
Description |
| RS-200 |
Gray/Black, 2 mm x 120 cm x 10 m |
| RS-201 |
Blue/Black, 2 mm x 120 cm x 10 m |
| RS-202 |
Green/Black, 2 mm x 120 cm x 10 m |
ESD 3 Layer Vinyl Mat
Features
- Heat fused vinyl composite with top and bottom dissipative vinyl layers and conductive grid mesh inner layer
- Conductive grid mesh inner layer
- Dissipative cushioned vinyl bottom layer
- Abrasion resistant top layer
- Non-humidity dependence
- Dimensionally stable
Technical specification
- Thickness: 3.2mm
- Width: 600(24"), 900(36"), 1200mm(48")
- Length: 10m, 15m(50ft), 30m(100ft)
- Construction: Heat fused vinyl composite
- Color: Blue, Dark Blue, Sky Blue, Gray, Green
- Texture: Light Embossing
- Hardness: 52 shore "A", per ASTM-D412
- Chemical Resistance: Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic hydrocarbons, mineral oil, aldehydes, and amines
- RTT Resistance: 10e6 - 8 Ohms (Test Method : ESD S4.1)
- RTG Resistance: 10e6 - 8 Ohms (Test Method : ESD S4.1)
Antistatic sticky mat - RS-350
- Rs 109 - 1011 Ω
- Size: 600 x1200 mm
- Colour: White
- 30 layers
- Suitable for clean Room application
Static conductive floor vinyl mat
Conductive vinyl floor mat: RG 5x104 - 106 Ω
Thickness: 2 mm
Optimum ESD protection electronic components and equipment
Good chemicals resistance
Does not require polishing and waxing
100 |
101 |
102 |
103 |
104 |
105 |
106 |
107 |
108 |
109 |
Order codes
| Part number |
Description |
| RS-MP223/colour |
Vinyl mat, roll size 2 x 23 m |
Grounding accessories for mats
 |
RS-P1
Grounding cord for floor and table mat, length 3m, built-in 1MΩ resistor, connection Ø 10 mm female snap/Ø 4,3 x 8 mm ring terminal. |
 |
RS-P2
Grounding cord for floor and table mat with dual banana jack, length 3m, built-in 1MΩ resistor, connection Ø 10 mm female snap/Ø 4,3 x 8 mm ring terminal. |
 |
RS-P3
Grounding cord for floor and table mat, length 3m, built-in 1MΩ resistor, connection Ø 10 mm female snap/banana plug with alligator clip. |
 |
RS-Z10MM
Snap push and clinch, 10mm |
